AP-AB1215 None Air Source AC Pulse Ion Bar
General
AP-AB1215 AC pulse ion bar is the newest developed bar type static eliminator for static removing.
It can be widely used in electronics, plastics, chemicals, printing, textile, optical and other industries.
Product Feature
11.Bar shaped and cross over static eliminator
22.Adjustable positive and negative ion output rate
33.Manufactured by using the latest patented technology of static removing
44.Fast speed of static removing, low ion balance and high safety
55.Adjustable positive and negative ion frequency
66.With alarm function of high voltage fault
77.Remote control ion output
8.8.Shock-proof function prevent user from being electric shocked
9.9.Support integrate control ,easy to operate.
◆Specification
| Model | AP-AB1215 |
| Output voltage | DC±5.00(KV) |
| Output frequency | 5, 30Hz (default) |
| Duty factor | 10%-90% |
| Power | 10W |
| Working distance | 100－1000mm |
| Ion balance | ≤|±30V| (AVE) |
| Discharge time | ≤1S |
| Working temperature | 0℃-50℃ |
| Working humidity | ＜70% |
| Bar Width | 335-410mm(spacing 25mm)；460-2960(Spacing 50mm) |
| Note | USD12.0 Per additional 100mm |
1,General
AP-AB1216 Air source AC pulse ion bar is the newest developed bar type static eliminator for static removing.
It can be widely used in electronics, plastics, chemicals, printing, textile, optical and other industries.
2,Features
- Bar shaped and cross over static eliminator
- Manufactured by using the latest patented technology of static removing.
- Fast speed of static removing, low ion balance and high safety.
- LCD on bar body indicates working status for easy use and maintenance
- Output voltage adjustable, fit for different static environment.
With alarm function of ion volume, electrode tip cleaning and high voltage
Notice on use and safety warning
- Read this manual carefully before installing and using of the device.
- Be sure the device reliable ground connected during use, otherwise may cause bar body burn.
- Touching of electrode tip during use strictly prohibited.
- Do not use this device in the environment where the humidity is greater than 75%.
- Input air must be clean and filled air without water, oil and dust particle
- It is strictly prohibited to use this equipment in combustible and explosive environment.
- Internal maintenance and repair must be carried out by professionals
Installation guide
- Choose optimal location for discharge and fix the bar and power supply steadily.
- Connect earth to earth connect end on ion bar.
- Insert one end of the power cord into power adapter and the other end into power port.
- Connect air connector to air supply device with tube and turn on the air switch.
- Turn on the power switch and adjust proper air pressure.
Outline dimensional drawing
| 2 | Static removing performance decline obviously | Pollute or damage of discharge pin | Clean or replace discharge pin |
| Electrode pad not tightly screwed | Be sure the electrode pad screwed tightly |
| Improper installation position | Confirm the optimum installation position |
| 3 | Static removing performance decline | There are conductor or other ion bar around | Remove conductor or other ion bar |
| 4 | HV Alarm | Electromagnetic disturb | Switch off and reset |
| Abnormal discharge | Check installation position and be away from conductors |
| Pollute or damage of discharge pin | Send back to manufacturer |
| 5 | Smoking or burning | Pollute or damage of discharge pin or electrode pad insulator | Send back to manufacturer |
Product Tags:
|
|
None Air Source AC Pulse Anti Static Bar AP-AB1215 Can Remote control Ion Output Images
|
